Playhouse Plans: 10 Steps on How to Build a Playhouse Your Kids Will Love

Building a playhouse from internet-bought playhouse plans for your kids is a lot like building a shed for yourself, except it’s much more stylish and safer because you know your kids will be playing in it. If done in the right frame of mind, it could be a family project. You can get as much excitement and fun out of creating the playhouse as your kids will have playing in it. To get you started in the right direction, here are the basics to help you build a playhouse for your kids.

* The first step is to choose a playhouse plan for your project, and the best advice here is to include your children. Search the Internet and find the plan that suits you and your children. Play it safe and get their opinions and you have nothing to lose.
* The second step in building a playhouse is to decide where you want to place the playhouse within your garden. You may need to do some prep work ahead of time, such as creating a level play area for the playhouse to rest on so it’s stable. Make sure it is not under power lines or tree branches that could damage it later. Also, make sure the site is in a higher area of ​​the yard so you don’t have to worry about water damage later.
* The third step in building a playhouse is to create a foundation. The type of foundation you use, concrete slab, pillar, wooden foundation, or other, depends on the playhouse plans you have chosen. Playhouse plans should explain the proper foundation for the playhouse, but you will need to be aware of local ordinances and homeowners association rules. Always check with your local city code officials before building anything.
* The fourth step in building a playhouse is to create the subfloor. Typically, 16-inch-on-center joists covered by plywood flooring are standard; nothing fancy but functional and safe. Plans may also call for a front porch or back deck, depending on the playhouse plans. Your playhouse plans should indicate how to complete this task.
* The fifth step in building a playhouse is framing the exterior walls, which is very similar to framing the walls of a house, except on a smaller scale. Here you have to place the walls in the basement. You will measure, mark, and cut the top and bottom plates. Don’t forget the location of the window while creating the walls. Cut various headers, king posts, cripple posts, and sills.
* The sixth step in building a playhouse is to sheath the walls with plywood or oriented strand board (OSB). The easiest way to do this is to lay down the plywood while the walls sit on top of the subfloor. However, it is critical that you square the walls before applying and attaching the plywood. If you’re using cedar plywood, you’ll need stain to protect it if you decide not to cover it with exterior siding. Continue placing the walls on top of the subfloor and join the walls together. Don’t forget to put a top plate on top of the walls… this gives it strength to support the roof. Repeat for interior walls.
* The eighth step in building a playhouse is to decide on the type of roof. Your theater plans should recommend the best type. Just follow the instructions and you’ll be fine. The most common types of roofs are hip or gable. The easiest is a gable, as it looks like a triangle and allows rain and snow to run off the roof. The hip roof is a bit more complicated because it has more angles with all sides sloping down to meet the walls. It also allows snow and rain to drain off easily, however it does provide more overhang if that is what you are looking for.
* The ninth step in building a playhouse is to install joists and ceiling joists according to the playhouse plans. Another option is prefabricated wooden roof trusses. If you are using beams instead of pre-fab wood trusses, you will need to add a beam post to each beam in the center for support.
* The tenth step in building a playhouse is to sheath the roof with plywood and choose a roof covering. Most plans will require asphalt shingles or wood shingles, but it’s up to you. Don’t forget to apply felt before you put the shingles on the roof. It is placed under the shingles and acts as a barrier against moisture.
* The tenth and final step in building a playhouse is to install windows, doors, siding and trim, paint and seal everything according to the playhouse plans. Your playhouse plans may call for a dormer or two to give it a bit of elegance. Those are easy and your playhouse plans will tell you how to install them. One last tip for installing windows is to use some form of safety glass to protect children from breaking during play.

There you have it, a playhouse built by you using internet playhouse blueprints. Okay, this is a simple version of how to build a playhouse, but with a good set of playhouse plans, the process will be step by step and much more detailed. Building a playhouse is more of an advanced woodworking project, however, don’t let that scare you from trying to build a playhouse for your kids. Your kids will love you for building it for them and your family will have fun working together building a playhouse that will last a lifetime.

Finally, a one-stop vein for a lifespan of craft plans!
Click Here

Please follow and like us:

Leave a Reply